The OMS Tesseract 60 lbs (27.2 kg) lift dual bladder is equipped with elastomeric bands for low drag and is the perfect complement to the OMS Profile side-mount system, or a re-breather. Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. The Tesseract like all other OMS BC’s uses rugged 1000 denier Nylon backed with 5-6oz (141.75-170.1g) Thermoplastic Polyurethane (TPU) for superior abrasion resistance in all overhead environments on the outer bag. The inner bladder is constructed of tough polyurethane material with ultrasonically welded seams and fittings for added strength. The inflation and dump valves are interchangeable for ease of configuration from top to bottom. Like all OMS BC’s the Tesseract integrates with many OMS harnesses where integral pull dump tunnels can be used to route the BC dump valve cords for ease of access.
This Wing is engineered with a “donut design”, resulting in superior buoyancy and trim control. The top of the BC (neck area) has a narrower air pathway design and the bottom air tunnel adds 10 lbs (4.54 kg) of lift (butt area) creating an optimum “heads up” trim position. The Tesseract Wing by design maintains a low profile and drag ratio due to the new and unique retraction band system. Diver’s side located inflator and dump assemblies eliminate “hang-ups”, impact damage and drag in overhead environments. Both OMS inflators come with low pressure 3/8″ threaded quick-disconnect (QD) hoses. The wing comes equipped with four corrosion resistant stainless steel grommets for harness mounting. The OMS Tesseract Dual Bladder Wing comes with an owner’s manual and is covered by a 12 month limited warranty.